05 | Keysight | Using Source/Measure Unit as an Ammeter – Demo Guide
4)
Press and select , and then press to configure the
Low terminal
state
to
FLOATING
.
If the low terminal state of the channel is set to FLOATING, you can see the status
indicator on the GUI as below, although no indicator can be seen on being set to
GROUNDED.
2. Measure current using the SMU (Channel 1) as a ammeter
2-1. Change View mode to Ch1 Single View
1) Press repeatedly until the
Channel 1
Single View
is displayed
2-2. Configure the condition to source and measure
1) Press to edit the
Source function
, and then select to set the
Source
function
to
Voltage source
.
GROUNDED
FLOATING
