Keysight Agilent X-Series, Getting Started Manual, Page: 64 / 119

Test Set Operating System
3
Getting Started Guide 65
Backing-up the factory calibration data
To back-up the factory calibration data you will need a USB mouse and storage device
and follow the step in
“Process 1" or “Process 2" below.
Process 1
Process 2
Step Notes
1 Insert the mouse in one of the
instrument USB ports
2 Insert the USB memory device in one
of the instrument USB ports.
3 Press
System
,
Alignments
,
Backup or Restore Align Data...
The Alignment Data Wizard will appear:
4 Follow the on screen instructions to
backup the calibration data to the USB
drive and save the file.
Step Notes
1 Insert the mouse in one of the test set USB
ports
2 Insert the USB memory device in one of
the test set USB ports.