Front and Rear Panel Features
2
Getting Started Guide
35
Display Annotations
This section describes the display annotation as it is on the Sequence Analyzer
measurement application display. Other measurement application modes have some
annotation differences.
Item Description
Function
Keys
1
Measurement bar - Shows general measurement
settings and information.
Indicates single/continuous
measurement.
Some measurements include limits that the data is
tested against. A Pass/Fail indication may be shown in
the lower left of the measurement bar.
All the keys in the test set Setup part
of the front panel.
2
Active Function (measurement bar) - when the current
active function has a settable numeric value, it is
shown here.
Currently selected front panel key.
3
Banner - shows the name of the selected application
that is currently running.
Mode
