background image

Notices

© Keysight Technologies 2019

No part of this manual may be reproduced in 

any form or by any means (including elec-

tronic storage and retrieval or translation 

into a foreign language) without prior agree-

ment and written consent from Keysight 

Technologies as governed by United States 

and international copyright laws.

Edition

September 2019

Available in electronic format only
Keysight Technologies

 

1900 Garden of the Gods Road 

 

Colorado Springs, CO 80907 USA

Warranty

THE MATERIAL CONTAINED IN THIS 

DOCUMENT IS PROVIDED "AS IS," AND IS 

SUBJECT TO BEING CHANGED, WITHOUT 

NOTICE, IN FUTURE EDITIONS. FURTHER, 

TO THE MAXIMUM EXTENT PERMITTED BY 

APPLICABLE LAW, KEYSIGHT DISCLAIMS 

ALL WARRANTIES, EITHER EXPRESS OR 

IMPLIED WITH REGARD TO THIS MANUAL 

AND ANY INFORMATION CONTAINED 

HEREIN, INCLUDING BUT NOT LIMITED TO 

THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE. KEYSIGHT SHALL 

NOT BE LIABLE FOR ERRORS OR FOR 

INCIDENTAL OR CONSEQUENTIAL 

DAMAGES IN CONNECTION WITH THE 

FURNISHING, USE, OR PERFORMANCE OF 

THIS DOCUMENT OR ANY INFORMATION 

CONTAINED HEREIN. SHOULD KEYSIGHT 

AND THE USER HAVE A SEPARATE WRITTEN 

AGREEMENT WITH WARRANTY TERMS 

COVERING THE MATERIAL IN THIS 

DOCUMENT THAT CONFLICT WITH THESE 

TERMS, THE WARRANTY TERMS IN THE 

SEPARATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in 

this document are furnished under a license 

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition 

Regulation ("FAR") 2.101. Pursuant to FAR 

12.212 and 27.405-3 and Department of 

Defense FAR Supplement ("DFARS") 

227.7202, the U.S. government acquires 

commercial computer software under the 

same terms by which the software is cus-

tomarily provided to the public. Accordingly, 

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its 

End User License Agreement (EULA), a copy 

of which can be found at http://www.key-

sight.com/find/sweula. The license set forth 

in the EULA represents the exclusive author-

ity by which the U.S. government may use, 

modify, distribute, or disclose the Software. 

The EULA and the license set forth therein, 

does not require or permit, among other 

things, that Keysight: (1) Furnish technical 

information related to commercial computer 

software or commercial computer software 

documentation that is not customarily pro-

vided to the public; or (2) Relinquish to, or 

otherwise provide, the  government rights in 

excess of these rights customarily provided 

to the public to use, modify, reproduce, 

release, perform, display, or disclose com-

mercial computer software or commercial 

computer software documentation. No addi-

tional government requirements beyond 

those set forth in the EULA shall apply, 

except to the extent that those terms, rights, 

or licenses are explicitly required from all 

providers of commercial computer software 

pursuant to the FAR and the DFARS and are 

set forth specifically in writing elsewhere in 

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify 

the Software.  With respect to any technical 

data as defined by FAR 2.101, pursuant to 

FAR 12.211 and 27.404.2 and DFARS 

227.7102, the U.S. government acquires no 

greater than Limited Rights as defined in 

FAR 27.401 or DFAR 227.7103-5 (c), as 

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It 

calls attention to an operating proce-

dure, practice, or the like that, if not 

correctly performed or adhered to, 

could result in damage to the product 

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until 

the indicated conditions are fully 

understood and met. 

A WARNING notice denotes a hazard. 

It calls attention to an operating pro-

cedure, practice, or the like that, if not 

correctly performed or adhered to, 

could result in personal injury or 

death. Do not proceed beyond a 

WARNING notice until the indicated 

conditions are fully understood and 

met.

Summary of Contents for AE6941A

























Reviews: