SERVice Subsystem
21
Keysight 8990B Programming Guide
513
SERVice:CSOUrce:FREQuency <character_data>
This command sets the frequency of the reference check source.
Syntax
Parameter
Example
Reset condition
On reset, the reference check source frequency is set to 1 kHz.
:CSOU
Space
?
character_data
:FREQ
SERV
Item
Description/Default
Range of values
character_data
Sets the check source frequency as:
–
CS1K
: Sets the frequency to 1 kHz. This is the default setting.
–
CS50M
: Sets the frequency to 50 MHz.
–
CS1_05G
: Sets the frequency to 1.05 GHz.
CS1K
CS50M
CS1_05G
SERV:CSOU:FREQ CS1K
This command sets the reference check source
frequency to 1 kHz.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...