20
WMEMory Subsystem
500
Keysight 8990B Programming Guide
WMEMory{1|2|3|4}:DISPlay <boolean>
This command turns on or off the waveform trace display of the specified memory
slot.
Syntax
Example
Remark
If no waveform data exists in the selected memory slot, error –221,“Settings
conflict;No data in waveform memory slot” will occur.
Query
WMEMory{1|2|3|4}:DISPlay?
This query enters a 1 or 0 into the output buffer indicating the state of the
waveform trace display of the specified memory slot.
– 1 is returned when the waveform trace display is turned on
– 0 is returned when the waveform trace display is turned off
Query example
WMEM
:DISP
1
2
3
4
0|OFF
1|ON
Space
?
WMEM2:DISP ON
This command turns on the waveform trace display of
memory slot 2.
WMEM3:DISP?
Queries whether the waveform trace display of memory slot
3 is turned on or off.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...