*PSC {0|1}
*PSC?
Power-On Status Clear
. Enables (1) or disables (0) the clearing of certain enable registers at power on:
l
Questionable Data Register (
l
Standard Operation Register (
)
l
Status Byte Condition Register (
)
l
Standard Event Enable Register (
The
command does not affect the clearing of the condition or event registers, just
the enable registers. For more information on the SCPI Status System, see
.
Parameter
Typical Return
{0|1}. Default: 1
0 or 1
Disable power-on clearing of affected registers:
*PSC 0
*RCL {0|1|2|3|4}
*SAV {0|1|2|3|4}
Stores the current instrument state to, or recalls the instrument state from, the state file
STATE_<n>.sta
in the root folder of the internal flash file system, where <
n
> is the number specified.
Parameter
Typical Return
{0|1|2|3|4}
(none)
Store the instrument state to the state file STATE_1.sta in the root folder of the internal flash file system:
*SAV 1
l
*SAV <
n
> is equivalent to
"INT:\STATE_
n
.sta".
l
*RCL <
n
> is equivalent to
"INT:\STATE_
n
.sta".
l
The state file created by *SAV 0, called STATE_0.sta, resides in the root folder of the internal flash file
system. It is overwritten with the power-down state of the instrument when power is cycled.
l
The instrument state enable settings are stored in nonvolatile memory. They do not change when
power has been off, after a Factory Reset (
) or after an Instrument Preset (
).
Keysight True
volt
Series Operating and Service Guide
273
SCPI Programming Reference
