Keysight R, Q, U, V, and W11644A 1-3
General Information
Calibration Kit History
Calibration Kit History
This manual applies to any Keysight 11644A series (R, Q, U, V, or W) waveguide
calibration kits whose serial number prefix is listed on the title page. If your
calibration kit has a different serial number prefix, refer to the next section for
information on how this manual applies.
11644A Series Kits with Serial Prefix 3012A
These calibration kits did not have a calibration definitions disk to support the
Keysight 8510C network analyzer. The part numbers provided in this manual
are the recommended replacement parts for these kits. The devices in these
kits should meet the specifications published in this manual.
Incoming Inspection
Verify that the case and its contents are not damaged. The foam-lined storage
case provides protection during shipping. If the case or any device appears
damaged, or if the shipment is incomplete, refer to
. Keysight will arrange for repair or replacement of incomplete or
damaged shipments without waiting for a settlement from the transportation