Keysight 1000B Series, User Manual

Page: 90 / 148

90 Keysight 1000B Series Oscilloscopes User’s Guide
3
Capturing Data
Setting Other Trigger Parameters
These are trigger system parameters that apply in all trigger modes.
To set the trigger sweep
Trigger sweep specifies whether acquisitions occur without a triggern or only with
a trigger.
1 Press [Menu] .
2 In the Trigger menu, press Sweep .
3 Continue pressing the Sweep softkey or turn the entry knob to select one of
these trigger sweep settings:
To set the trigger coupling
Trigger coupling is used to filter low frequency signal components or DC offsets
from the trigger path when they interfere with achieving stable triggers.
Trigger coupling is similar to channel coupling (see page 47 ), but it only affects
the triggering system and does not change how the signal is displayed.
To set the trigger coupling:
1 Press [Menu] .
2 In the Trigger menu, press Set Up .
3 In the Set Up menu, press Coupling .
Auto Acquire waveform even when no trigger occurs.
Normal Acquire waveform when trigger occurs.