Keysight
Technologies
Y1133A Low-Thermal
External DMM Scanning Kit
(for the 34401A, 34410A, 34411A, and L4411A DMMs)
Product Description and Installation
WARNING
Before connecting the cable kit to the instruments, be sure to disconnect all live external
voltages present on the multiplexer and analog bus.
To prevent a possible shock hazard, do not remove the input terminal block cover.
Description
The
Keysight
Y1133A scanning kit enables system-level scanning and measurements
between standalone
Keysight
multiplexers and digital multimeters (DMMs). The kit consists
of a measurement cable (Y1133-61601) for the transfer of input signals, and a trigger
cable (Y1133-61602) which controls the scanning sequence. The cables are compatible
with multiplexers such as the L4421A 40-Channel Armature Multiplexer and L4433A
Dual/Quad 4x8 Reed Matrix, and the 34401A, 34410A, 34411A, and L4411A DMMs.
Connecting the Cables
The scanning kit cables are connected between the multiplexer/matrix and DMM as
described below. An example using the L4411A and L4421A is shown in the figure.
Cable
Multiplexer
/
Matrix
DMM
Measurement: (Y1133-61601)
Connector: “Analog Busses”
(9-pin D-sub)
Connector: front/rear panel input terminals
Triggering: (Y1133-61602)
Connector: “Ext Trig”
(9-pin D-sub)
Connector: rear panel “Ext Trig ” (BNC)
rear panel “VM Comp” (BNC)
L4421A
L4411A
Y1133-61602
Y1133-61601
Ext Trig
VM Comp
DMM
Inputs
