Keysight Technologies U3022BH10, User'S And Service Manual

Page: 94 / 124

Operational Check U3022BH10
Verifying Operational Check Failures
If your test results fail the Operational Check limits, verify following:
1. Ensure that the Test Set is turned on and connected properly to the PNA-X.
2. Check all appropriate PNA-X and Test Set connectors for damage, cleanliness, and proper
torque.
3. Repeat the relevant 1-Port calibrations.
4. Verify that the PNA-X is operating properly and meeting its published specifications. If the
PNA-X is connected to the Test Set it will fail the Operational Check. Refer to
"Network Analyzer Requirements" on page 12 .
24-Port System Interconnect Cable Verification
1. Perform the "System Operational Checks" given on page 27 . For the 24-Port system
configuration, you can use a similar concept.
2. If more details are needed for troubleshooting the U3022BH10, refer to the "Service Information"
section on page 95 .
94 U3022BH10 User's and Service Guide