U3022AH10
Controlling the System with N5242A
/B
Trace Measure S-Parameter
S-Parameter selection can be accomplished using Response Measure menu. Select TRACE
>
Measure. Use the drop-down menus to select S-Parameters for the 12-Port system,
as shown
. The first number in the Sxx selection is the Receiver Port and the second
number
will be the Source Port. Any port can be selected to be the Receiver, Source or both, as in
S11.
The front panel R LED indicates the port is the Receiver and the S LED indicates the port is
the
Source.
The 'B' Model analyzer
S-Parameter selections are done by using the front keypad. For example,
to select S25:
MEAS [MEAS] > Enter S-Parameter > [2][.][5] [Enter]
Figure
25
12-Port Trace Measure
U3022AH10 User's and Service Guide
35
