U3022AH10
General Specifications
General Specifications
Specifications for the U3022AH10 Multiport Test Set are characteristic for the System
performance of the PNA-X and Test Set. Actual performance of the system is based on the
customers PNA-X that is used with the Test Set and components used for high power
configurations.
A functional certificate is supplied for the U3022AH10. The U3022AH10 performance is based
on external components such as the calibration kit and network analyzer. There are no internal
adjustment in the U3022AH10, therefore an annual calibration is not required.
When connected to a PNA-X, without external power components, this Test Set
will degrade the performance at the test ports. The internal mechanical switch
paths reduce test port power and power to the receivers. This affects the test
port power of the PNA-X and reduces dynamic range. The test port power,
indicated by the PNA-X, and power to the receivers can be reduced as much as
3 dB. This will decrease the dynamic range (depending on the frequency) by as
much as 6 dB.
Power Requirements
Verify that the required ac power is available before installing the Test Set to the PNA-X.
•
100/120/220/240 VAC (50/60Hz)
•
The instruments can operate with mains supply voltage fluctuations up to ± 10% of the
nominal voltage.
•
Air conditioning equipment (or other motor–operated equipment) should not be placed on
the same ac line that powers the Test Set and PNA-X.
•
contains the maximum wattage for all instruments. This table can be use to
determine the electrical and cooling requirements.
This is a Safety Class I product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall be inserted only into a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor, inside or outside the instrument, is likely to make the
instrument dangerous. Intentional interruption is prohibited.
Table
4
Power Requirements
Standard Equipment
Instrument
Maximum
Wattage
N5242A
450
U3022AH10
350
U3022AH10 User's and Service Guide
13
