Keysight Technologies U1401B, Quick Start Manual

Page: 15 / 205

Keysight U1401B Quick Start Guide 15
Keysight U1401B Quick Start Guide 15
ENGL
ISH
Performing Temperature Measurements
1 Set the slide switch to the M position to
disable the output.
2 Set the rotary switch to mV .
3 Press and hold for more than 1 second.
4 Plug the thermocouple probe (with adapter)
into the INPUT terminals.
5 Touch the surface to be measured with the
thermocouple probe and read the display.
WARNING
– Before measuring the temperature of a circuit or
device, disconnect its power.
– The bead type thermocouple probe is suitable for
measuring temperature from –40 °C to 204 °C in
PTFE compatible environments. The probes may
emit toxic gas above this temperature range.