Keysight Technologies RP7900 Series, Operating And Service Manual

Page: 91 / 318

Set Over-voltage Protection
Use the front panel menu.
The front panel command menu lets you access most of the instrument’s functions. The actual
function controls are located at the lowest menu level. Briefly:
l
Press the Menu key to access the command menu.
l
Press the left and right (<, >) navigation keys to move across the menu commands.
l
Press the center Select key to select a command and move down to the next level in the menu.
l
Press the Help key at the lowest menu level to display help information about the function con-
trols.
l
To exit the command menu press the Meter key to immediately return to meter mode, or press the
Menu key to return to the top level.
For a map of the front panel menu commands, refer to Front Panel Menu Reference .
Menu example - setting over-voltage protection.
Press the Menu key to access the front panel command menu. The first line identifies the menu path.
When the menu is first accessed, the menu is at the top or root, and the path is empty. The second line
indicates the commands that are available at the present menu level. In this case, the top-level menu
commands are shown, with the Output command highlighted. The third line indicates which
commands are available under the Output command. If there are no lower level commands, a brief
description of the highlighted command is displayed.
Press the right arrow navigation key > to traverse the menu until the Protect command is highlighted.
Press the Select key to access the Protect commands.
Since the OVP command is already highlighted, press the Select key to access the OVP dialog.
Keysight RP7900 Series Operating and Service Guide 91
3 Getting Started