Keysight Technologies N5990A, User Manual

Page: 72 / 318

72 Keysight N5990A MIPI M-PHY Receiver Test User Guide
3 Calibrations and Test Procedures
MIPI M-PHY Parameters
The MIPI M-PHY parameters are of three types:
1 Sequencer parameters
2 Group parameters
3 Procedure parameters
Sequencer Parameters
The Sequencer parameters control the flow of the test sequencer, not the
behavior of individual procedures. They are identical across all versions of
N5990A. One of them, Repetitions, is available for all procedures and
groups in the procedure tree. The others are only available for procedures.
Like all other parameters the sequencer parameters are shown on the right
side of the N5990A user interface and you can change them (see
Figure 36 ).
Figure 36 MPHY Sequencer Parameters
All sequencer parameters are listed in alphabetical order in Table 4 .
Table 4 MPHY Sequencer Parameters