60
Keysight N5990A MIPI M-PHY Receiver Test User Guide
2
N5990A M-PHY Station
•
Insertion Loss 2
: Insertion loss applied to the second frequency
point.
•
Automatic
: The
Embedded ISI
fixture is calibrated to a target value,
discounting the loss of the cables and of the Switch (if present). Using
the
Automatic
mode will result in a new calibration, named
Embedded
Fixture ISI Calibration
.
These properties can be set for each
Gear
.
Connection Setup
Click the
Connection Setup
button (see
) to open the
Connection Setup
panel (see
Figure 29
Connection Setup panel (for Transmitter Configuration)
It contains the following options:
1
Probing Method
: It can be selected as:
•
Active Probe (Differential Probe)
•
Active Probe (Active Termination Adapter)
•
Active Probe (Active Termination Adapter)[Manual]
•
Direct Connect
2
Connection Type
: It can be selected as:
•
Single-Ended
Summary of Contents for N5990A
