Keysight Technologies N5290A Installation Manual Download Page 94

Page: 94 / 96

5-4

Keysight N5290/1A Installation Guide

Maintenance and Support
Keysight Support, Services, and Assistance

Keysight Support, Services, and Assistance

Information on the following topics is included in this section.

— “Service and Support Options”
— “Contacting Keysight”
— “Shipping an Item to Keysight for Service or Repair”

Service and Support Options

The N5290/1A system has a one-year service warranty which covers

troubleshooting the system to an individual instrument, device, or cable. The

service warranty includes repair or replacement of defective components. Most

repairs require that the defective component be returned to Keysight.

Contacting Keysight

Assistance with test and measurements needs and information or finding a

local Keysight office are available on the Web at:

http://www.keysight.com/find/assist

If you do not have access to the Internet, please contact your Keysight field
engineer.

Extended warranties are available in many geographical areas. Contact Keysight for additional
information on available service agreements for this product. Refer to

“Contacting

Keysight”

In any correspondence or telephone conversation, refer to the Keysight

product by its model number and full serial number. With this information,

the Keysight representative can determine whether your product is still

within its warranty period.

Summary of Contents for N5290A

































































































Search results

Summary of Contents for N5290A

Reviews:

Related manuals for N5290A

Brands by name

Popular brands

Keysight Technologies N5290A, Installation Manual

Search results

Summary of Contents for N5290A

Reviews:

Related manuals for N5290A

Brands by name

Popular brands