Using the Probe
1
N2797A User’s Guide
19
Y-Lead
with
Flexible Nose Clips and Pico Hooks
You can use flexible nose clips and Pico hook clips to make connections to components or
wires with leads that are 1.01 mm (0.04 inches) in diameter or smaller. With today’s
miniature IC- and component-packaging techniques, these clips can make probing
challenging devices much easier. The bandwidth with accessory is 500 MHz.
Figure 8
Flexible Nose and Pico Hook Clips
Most users prefer to attach the clips to the probe via the Y-lead adapter as shown in the
picture below. Press the back of the clip to extend the grasping hook and then release to
tighten the hook around the component you are testing.
Figure 9
Probe with Flexible Nose Clips Attached
CAUTION
The clips have an ambient operating temperature range of –20°C to +80°C (–4°F to +176°F). This is a
slightly reduced range compared to the probe.
Summary of Contents for N2797A
