Keysight Technologies N108 A Series, Getting Started, Page: 64 / 78

64 N108xA-Series Getting Started
4
Installing N108xA on the 86100D
Step 7. Add ENA Network Analyzer to Keysight Connection
Expert
An ENA or PNA network analyzer is required to perform the return loss tests.
1
Locate the ENA instrument’s Hostname (Full Computer Name) and record it on the following line.
Refer to the network analyzer‘s documentation for locating this information.
Hostname: ___________________
2
On the PC, view the Keysight Connection Expert, and click the LAN I/O interface identified in
Figure 63 . Then, click Add Instrument .
Figure 63 Adding the ENA
3
In the Add LAN Instruments dialog box, click the Add Address button to add the network analyzer.
4
In the Enter Instrument Address field, enter the Hostname of the network analyzer that you recorded
above. Figure 64 on page 65 shows an example of this dialog box with the proper settings.
5
In the Optional Connection Information field, select Default instrument .
NOTE
If you are using a PNA instead of an ENA network analyzer, skip these steps and continue with “Step 8. Add PNA
Network Analyzer to Keysight Connection Expert" on page 66.
NOTE
A connection is established to an ENA using the LAN protocol.