(M9800A PXIe VNA modules) Quick Start Guide
4.
Download the network analyzer software from
https://www.keysight.com/support/M9800A
webpage, click the Drivers, Firmware & Software tab.
5.
Execute and Install the network analyzer software according to the installer prompts.
6.
Install M9800A PXIe module as below. After installation, power on the chassis switch and click the
Network Analyzer icon to execute the VNA application.
The PXI chassis has multiple air intakes located on the lower sides, lower front and bottom front of chassis.
Fan exhausts through the rear of the chassis.
7.
Select the required M980xA, then click RUN. See the Help: Quick Start > SFP Launcher for more
information.
Additional information:
Topic
URL
Product information
https://www.keysight.com/products/M9800A
Manuals (Help)
https://www.keysight.com/manuals/M9800A
Technical support
https://www.keysight.com/support/M9800A
Multiple modules setup
https://www.keysight.com/find/m980xa-mm
Connector Care
http://na.support.keysight.com/pna/connectorcare/Connector_Care.htm
Contacting Keysight
https://www.keysight.com/find/assist
This information is subject to
change without notice.
© Keysight Technologies 2019
Edition 2, Jun 2019
