Keysight Technologies M9537A, Startup Manual

Page: 12 / 36

4 Keysight M9537A AXIe Embedded Controller Startup Guide
Introduction
Module Handling Procedures
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following figure shows an example of a static-safe work station using two
types of ESD protection. Purchase acceptable ESD accessories from your local
supplier.
- Conductive table-mat and
wrist-strap combination.
- Conductive floor-mat and
heel-strap combination.
Both types, when used together,
provide a significant level of ESD
protection. Of the two, only the
table-mat and wrist-strap
combination provides adequate ESD
protection when used alone. To
ensure user safety, the static-safe
accessories must provide at least 1
M

of isolation from ground.
Both methods, when used together, provide a significant level of ESD protection.
Of the two, only the table-mat and wrist-strap combination provides adequate
ESD protection when used alone. To ensure user safety, the static-safe
accessories must provide at least 1 M of isolation from ground.
Related Documentation
No printed documentation other than this Startup Guide is supplied with the
Controller Module.
Adobe Reader is required to view the documentation supplied on the M9537A
product information CD. It is available free at: http://www.adobe.com . You
should install this on your M9537A before attempting to open a PDF file.
For the latest M9537A documentation, go to
www.keysight.com/find/M9537A
and click the Document Library tab.