10
M9403A and M9404A
Install the Software
Power up the Controller
CAUTION
If you are using a remote controller and you have installed the interface cable, you
must power up the chassis
before
you power up the PC. As well, you must power
down the PC
before
you power down the chassis.
If you are using an embedded controller, complete the following steps:
1. Install the embedded controller module into the compatible chassis. The Keysight M9036A
PXIe Embedded Controller and Keysight M9018A PXIe Chassis are recommended. Please
refer to the embedded controller and chassis documentation for further details.
2. Connect peripherals (mouse, keyboard and monitor).
3. Turn On the chassis.
Install the Software
NOTE
Administrator privileges will be needed for software and hardware installation.
This includes first-time installation of a module in a different chassis slot.
The software installation includes the following:
NOTE
Version 16.2 (or newer) of the Keysight IO Libraries Suite is required.
• The Keysight IO Libraries Suite CD (E2094-60003), includes the Keysight Connection Expert.
It is also available at
www.keysight.com/find/iosuite
.
• Instrument software, which includes the soft front panel (SFP), device driver (IVI-COM) and
documentation for the M9403A and M9404A. This software CD is included with your
shipment (M9499-10002).
Use the following procedure to install the software:
1. From the Keysight IO Libraries Suite CD (E2094- 60003) browser, launch the installer.
2. Follow the installer prompts to install the IO Libraries Suite.
3. From the Product Software and Information CD (M9499-10002) browser, launch the
installer.
4. Follow the installer prompts to install all software and documentation for the module.
5. After installation has completed, power down the host PC.
Summary of Contents for M9403A
Page 4: ...1 M9403A and M9404A ...
