background image

Safety Symbols

A CAUTION denotes a hazard. It 

calls attention to an operating pro-

cedure or practice that, if not cor-

rectly performed or adhered to, 

could result in damage to the 

product or loss of important data. 

Do not proceed beyond a CAUTION 

notice until the indicated condi-

tions are fully understood and met. 

A WARNING denotes a hazard. It 

calls attention to an operating pro-

cedure or practice, that, if not cor-

rectly performed or adhered to, 

could result in personal injury or 

death. Do not proceed beyond a 

WARNING notice until the indi-

cated conditions are fully under-

stood and met. 

Products display the following sym-

bols:

The CSA mark is a registered trade-

mark of the Canadian Standards Asso-

ciation and indicates compliance to 

the standards laid out by them. Refer 

to the product Declaration of Confor-

mity for details.

Notice for European Community: This 

product complies with the relevant 

European legal Directives: EMC Direc-

tive (2004/108/EC) and Low Voltage 

Directive (2006/95/EC).

The Regulatory Compliance Mark 

(RCM) mark is a registered trademark. 

This signifies compliance with the Aus-

tralia EMC Framework regulations 

under the terms of the Radio Commu-

nication Act of 1992.

ICES/NMB-001 indicates that this ISM 

device complies with the Canadian 

ICES-001.

This symbol represents the time period 

during which no hazardous or toxic 

substance elements are expected to 

leak or deteriorate during normal use. 

Forty years is the expected useful life 

of this product.

South Korean Class A EMC Declara-

tion. this equipment is Class A suitable 

for professional use and is for use in 

electromagnetic environments outside 

of the home.

 

Waste Electrical and 

Electronic 

Equipment (WEEE) 

Directive

2002/96/EC

This product complies with the WEEE 

Directive (2002/96/EC) marking 

requirement. The affixed product label 

(see below) indicates that you must not 

discard this electrical/electronic prod-

uct in domestic household waste.

Product Category: With reference to 

the equipment types in the WEEE 

directive Annex 1, this product is clas-

sified as a “Monitoring and Control 

instrumentation” product.
Do not dispose in domestic household 

waste.
To return unwanted products, contact 

your local Keysight office, or see 

www.keysight.com/environment/prod-

uct 

for more information. 

Refer to manual for 

additional safety 

information.

Earth Ground.

Chassis Ground.

Alternating Current (AC).

Direct Current (DC).

Standby Power. Unit is not 

completely disconnected 

from AC mains when 

power switch is in standby 

position
Indicates that antistatic 

precautions should be 

taken.

Operate the PXIe chassis 

in the horizontal 

orientation. Do NOT 

operate this chassis in the 

vertical orientation.

v

Summary of Contents for M9019A PXIe





































Reviews: