Labels and Annotations
You can create and display labels for each voltage, current, and power channel. Press
[Label]
to
show or hide the channel labels at the left.
To assign a label to a channel
1.
Press
[Label] > Channel
and select a channel to label. The default channel labels are shown
below. The channel does not have to be turned on to have a label assigned, but if the
channel is turned on, its label will be highlighted.
2.
To select an existing label, press
Library
, then turn the
Entry
knob or repeatedly press
Library
to select a label. To create a new label (and add it to the library), press
New Label
,
enter the label text, and press
OK
.
3.
Press
Apply New Label
to assign the label to the selected channel.
68
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide
