:SBUS<n> Commands
27
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
911
:SBUS<n>:SENT:TRIGger:TOLerance
Command Syntax
:SBUS<n>:SENT:TRIGger:TOLerance <percent>
<percent> ::= from 1-28, in NR1 format.
The :SBUS<n>:SENT:TRIGger:TOLerance command specifies the tolerance
variation that is considered a violation.
The trigger tolerance can be up to the :SBUS<n>:SENT:TOLerance setting minus
two percent. For example, after sending ":SBUS1:SENT:TOLerance 20", the
:SBUS1:SENT:TRIGger:TOLerance setting can be from 1 to 18.
Query Syntax
:SBUS<n>:SENT:TRIGger:TOLerance?
The :SBUS<n>:SENT:TRIGger:TOLerance? query returns tolerance variation
percent setting.
Return Format
<percent><NL>
<percent> ::= from 1-28, in NR1 format.
See Also
•
•
•
•
•
•
•
•
":SBUS<n>:SENT:SIGNal<s>:DISPlay"
•
":SBUS<n>:SENT:SIGNal<s>:LENGth"
•
":SBUS<n>:SENT:SIGNal<s>:MULTiplier"
•
":SBUS<n>:SENT:SIGNal<s>:OFFSet"
•
":SBUS<n>:SENT:SIGNal<s>:ORDer"
•
":SBUS<n>:SENT:SIGNal<s>:STARt"
•
•
•
•
":SBUS<n>:SENT:TRIGger:FAST:DATA"
•
":SBUS<n>:SENT:TRIGger:SLOW:DATA"
•
":SBUS<n>:SENT:TRIGger:SLOW:ID"
•