6
Measure S-Parameters (NA Mode)
S-parameter syntax is described by the following:
S (out | in)
out
= FieldFox receiver port
in
= FieldFox source port
1.
Press
Preset
then
Preset
2.
Press then
Mode
then
NA
then choose from the
following:
-
S11
1-port reflection measurement.
-
S21
2-port transmission measurement.
-
S12
Reverse 2-port transmission measurement.
Requires the full 2-port S-parameter option.
-
S22
Reverse 1-port reflection measurement.
Requires the full 2-port S-parameter option.
OR Press
Trace 6
then
Num of Traces
then select a
Multi-trace configuration. Learn more on page 8.
3.
Press
Freq/Dist
then either
Start
and
Stop
or
Center
and
Freq Span
to enter a frequency range for the
measurement.
4.
Press
Cal 5
to calibrate the measurement. See page 9
to learn more.
Continued on following page…
