9
Calibration (
CAT, NA, VVM
)
Starting with A.11.25 firmware, for the B
models, the FieldFox output power defaults to
-15 dBm.
Calibration is performed in CAT, NA, and VVM Modes.
A calibration is performed automatically when the
FieldFox is powered ON, CalReady sets the reference
plane at the test port connectors.
Press
Cal 5
then see the FieldFox User’s Guide.
Cal Rdy
is shown on the screen when a CalReady is
correcting the measurement.
CAL ON U
is shown on the screen when a User Cal is
correcting the measurement.
When a calibration is being interpolated, an asterisk is
added to the screen annotation as follows:
Cal ON*
