4
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware
For example, to set up a four-oscilloscope system, your configuration would
include one N2164A kit (to go from one oscilloscope to two) and two N2165A kits
(to go from two oscilloscopes to three and then from three oscilloscopes to four).
See
MultiScope
Control Software
To control MultiScope systems and analyze captured data, you can use:
• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope
software is included as a standard feature.
• D9010BSEO Infiniium Offline oscilloscope analysis software on an external host
computer. MultiScope software is included as a standard feature.
This software allows time-synchronized acquisitions for multiple-oscilloscope
systems with very low oscilloscope-to-oscilloscope jitter and drift. This software
can be used to configure, capture, and store real-time voltage signals.
Not Included
MultiScope systems also require:
• Equipment rack.
• Rack mount kits (N2156A) for each oscilloscope in the rack.
• Remote interface connection between the system running the MultiScope
control software (either the Leader oscilloscope or an external host computer)
and each oscilloscope in the system (for controlling the individual oscilloscopes
and moving captured data to the host computer).
Ethernet LAN or instrument USB are the most common interface options used.
Summary of Contents for EXR Series
Page 1: ...Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide...
Page 32: ...32 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide 5 Next Steps...
Page 34: ...34 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide Index...
