i3070 4-mod Inline System (E9986E)
Replacing the Power Supply
19
8
Cables labeled
L1
,
N2
,
E
,
P+
, and
P-
(previously connected to PS1) are to be
connected to the Omron power supply. The terminal point connections remain
the same.
•
If using the existing cables, the connector heads have to be replaced with
ferrule heads to connect to the Omron power supply.
•
If the existing cables are not long enough, replace them with the new cables
that have the same labels. Be sure to connect the new cables to the same
locations as the old cables.
9
Connect a new cable labeled
+
from F-5 to TB-3.
10
Remove the cables labeled
L4
and
L5
which are connected between K-B and
TB-1.
Omron 20 A AC/DC
power supply
TB-3
F-5
TB-1
K-B
