3
Software Installation, Configuration & Licensing
58
Keysight E8740A Automotive Radar Installation & User Guide
Software Installation
The SW components required for the E8740A Automotive Radar are installed
separately. Please install the components in the following order:
1
Install the TAP Development System application.
Installation steps can be found in the "Installing TAP" section of
. The current supported revision of the TAP system is
version 8.8 or later.
These plugin components will install all the necessary DLLs into the Windows
TAP folder (C:\Program Files\Keysight\TAP) to allow the selection and
execution of the Automotive Radar.
2
Install Keysight Signal Studio.
Download the Signal Studio software suite
3
Install Keysight VSA Software.
Download the VSA software
here
.
Refer to the installation manual for futher information
here.
4
Install Keysight IO Libraries.
Download the IO Libraries
here.
NOTE
The Keysight Signal Studio contains the Keysight IO Libraries.
NOTE
The VSA software is used wherever the configuration includes a scope.