26 Keysight E8363B/C and E8364B/C Installation Note
General Information
Installation Procedure for the Upgrade Kit
1-
Step 10.Reinstall the Outer Cover
Refer to
for this procedure.
1.
Slide the cover over the analyzer frame.
2.
With a T-20 TORX driver, install the four rear panel feet (item
③
) by
installing the center screws (item
④
).
3.
Slide the four bottom feet (item
⑤
) into position on the cover.
4.
With a T-20 TORX driver, install the strap handles (item
①
) by installing
the screws (item
✍
) on both ends of the handles.
Figure 16
Outer Cover Reinstallation
This procedure is best performed with the analyzer resting on its front
handles in the vertical position.
Do not place the analyzer on its front panel
without the handles
. This will damage the front panel assemblies.
