Keysight E8363B/C and E8364B/C Installation Note 23
General Information
Installation Procedure for the Upgrade Kit
Step 8.Replace the Lower Front Panel Overlay (Option 014 Only)
Refer to
for this procedure.
1.
From the back side of the front panel, use a blunt object in one of the
cutouts in the frame to push the overlay (item
①
) and separate it from the
front panel.
2.
From the front side of the front panel, pull the overlay completely off and
discard it.
3.
Remove any adhesive remaining on the front panel.
4.
Remove the protective backing from the new Option 014 front panel
overlay (item
①
).
5.
Starting from either the left or right side,
loosely
place the overlay in the
recess on the lower front panel, ensuring that it fits tightly against the
recess edges.
6.
Once the overlay is in place, press it firmly onto the frame to secure it.
Figure 14
Lower Front Panel Overlay Replacement
The new parts referenced in this procedure are listed in
.
The figure above shows the E8363/4B front panel and floppy disk drive.
The E8363/4C front panel has a slightly different appearance and does not
include a floppy disk drive.
