manualshive.com logo in svg

Keysight Technologies E7760A, Getting Started Manual

Share
Download
Keysight Technologies E7760A Getting Started Manual Download Page 16

 16                                                                                                                                        Getting Started Guide

Quick Start
Initial Inspection

Initial Inspection

Inspect the shipping container and the cushioning material for signs of stress. 

Retain undamaged shipping materials for future use, as you may wish to ship 

the test set to another location or to Keysight Technologies for service. Verify 

the contents of the container against the table below.

Item

Deliverable

Description

Getting Started Guide (this 

document)

Provides first-time power on 

instructions, licensing 

information, operating system 

information, and general 

hardware information.

Keysight M1650A mmWave 

Transceiver

RF Cable Assembly 

(E7760-60006)

In addition to test signals, carries 

DC supply voltage from E7760A.

The M1650A is used in conjunction with the E7760A Wideband Transceiver, but 

that is a separate purchase and is not always shipped with the M1650A.

Summary of Contents for E7760A




























Reviews:

No comments

Brands by name

Popular brands

Load more brands