Keysight Technologies B2900 Series User Manual Download Page 62

Page: 62 / 234

2-22

Keysight B2900 User’s Guide, Edition 5

Introduction
Accessories

Accessories

Furnished Accessories

The Keysight B2900 is furnished with the following accessories.

•

Quick Reference, 1 ea.

•

Product Reference CD-ROM, 1ea.

•

Keysight IO Libraries CD-ROM, 1ea.

•

Keysight EasyEXPERT for PC Software CD, 1ea.

•

License-to-use for EasyEXPERT

•

Power cord, 1 ea.

•

USB cable, 1 ea.

The Product Reference CD-ROM stores Keysight B2900A Quick I/V Measurement
Software, sample programs, user manuals, and application notes.

Available Accessories

For the available accessories for the Keysight B2900 series, see the catalog

Accessories for the Keysight B2900 Precision Instrument Family

To get the latest catalog, go to

www.keysight.com/find/b2901a

and click “Technical

Support” and “Catalogs”.

Summary of Contents for B2900 Series











































































































































































































































Search results

Summary of Contents for B2900 Series

Reviews:

Related manuals for B2900 Series

Brands by name

Popular brands

Keysight Technologies B2900 Series, User Manual

Search results

Summary of Contents for B2900 Series

Reviews:

Related manuals for B2900 Series

Brands by name

Popular brands