Keysight Technologies B2900 Series, User Manual

Page: 106 / 234

4-6 Keysight B2900 User’s Guide, Edition 5
Front Panel Reference
Display and Assist Keys
Display and Assist Keys
Keysight B2900 provides several display modes which depend on the model as
shown below. The display mode is changed by the View key. Pressing the key
changes the mode as shown below.
On B2901A Single

Graph

(return to Single)
On B2902A Dual

Single for channel 1

Single for channel 2

Graph

(return to Dual)
On B2911A Single

Graph

Roll

(return to Single)
On B2912A Dual

Single for channel 1

Single for channel 2

Graph

Roll

(return to Dual)
For each display mode, five assist keys are available on the right side of the display.
They are assigned to several softkeys such as Mode, Source, Limit, Measure, and
More. The softkey assignment depends on the display mode.
For details of each display mode and assist keys, see the following sections.
• “Dual View”
• “Single View”
• “Graph View”
• “Roll View”
• “Status Information”
The status information is common for all display modes. It is displayed above the
bottom softkeys associated with the function keys. This display area is also used to
display system messages and error messages.