manualshive.com logo in svg

Keysight Technologies 85091D, Reference Manual

Share
Download
Keysight Technologies 85091D Reference Manual Download Page 161

Electronic Calibration Modules Reference Guide                                                                               6-5

Replaceable Parts
1.85 mm Modules and Accessories

1.85 mm Modules and Accessories

Table 6-4 1.85 mm Modules and Accessories

Description

a

a. See 

“Clarifying the Terminology of a Connector Interface” on page 1-1

.

Qty

Part Number

Adapters (added with Option 00A – N469xD only)

1.85 mm -f- to -f- adapter

 

1.85 mm -m- to -m- adapter

1

 

1

85058-60114

 

85058-60113

Protective End Caps

1.85 mm -f- connector cap (for adapter) 

b

1.85 mm -m- connector cap (for adapter) 

b

b. These items are not included, but can be ordered separately.

as required

 

 

as required

1401-0202

 

 

1401-0208

Gages 

b

2.4 mm -f- pin-depth gage

c

 

2.4 mm -m- pin-depth gage

c

c. A 2.4 mm gage is capable of measuring 2.4 mm and 1.85 mm connectors.

1

 

1

11752-60607

 

11752-60108

Other

Electronic calibration module reference guide (online)

 

USB cable A to B, 2 meter

 

1/2 in to 9/16 in open-ended wrench 

b

 

20 mm, 90 N-cm (8 in-lb) torque wrench 

b

 

5/16 in, 90 N-cm (8 in-lb) torque wrench 

b

 

Spanner wrench 

b

 

Replacement ruggedized plastic storage box for the ECal module and 
accessories 

d

d. This item is included, but a replacement can be ordered separately.

1

 

1

 

1

 

1

 

1

 

1

 

 

1

N7550-90002

 

8121-2671

 

8710-1770

 

8710-1764

 

8710-1765

 

08513-20014
1540-2345 – Refer to 

Table 1-5, 

“N469xD 

Modules”, on 

page 1-17

.

Summary of Contents for 85091D













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands