Keysight Technologies 16380C, Operating Note

Page: 10 / 17

8 Chapter 1
General Information
Description
Description
The
Keysight
16380C Capacitance Standard Set consists of three precision capacitors 0.01
µ
F (16385A), 0.1
µ
F (16386A), and 1
µ
F (16387A). One precision capacitor 10
µ
F
(16388A) is also added with the option. All four capacitors have high capacitance stabillity
and are virtually unaffected by changes in environmental temperature, ensuring
measurement repeatability and reliability.
The 16380C was designed for use in calibrating precision impedance measuring
instruments (such as LCR meters, impedance analyzers, etc.) that have capacitance ranges
between 0.01
µ
F and 10
µ
F. The 16380C can be used to directly certify capacitance
measurement accuracy over the 0.01
µ
F to 10
µ
F range.
Contents
The 16380C contents are listed in Table 1-1.
Initial Inspection
Inspect the shipping container for damage. If the shipping container or cushioning material
is damaged, it should be kept until the contents of the shipment have been checked for
completeness and the instrument has been checked mechanically.The contents of the
shipment should be as shown in Table 1-1 If the shipment is incomplete, or if there is
mechanical damage or defects, notify the nearest
Keysight
office. If the shipping container
is damaged, or the cushioning material shows signs of stress, notify the carrier as well as
the
Keysight
office. Keep the shipping materials for carrier’s inspection. The
Keysight
office will arrange for repair or replacement at
Keysight
Option, without waiting for claim
settlement.
Table 1-1
Description Keysight Part No. Qty.
16385A (0.01
µ
F) Not Assigned 1
16386A (0.1
µ
F) Not Assigned 1
16387A (1
µ
F) Not Assigned 1
16388A (10
µ
F) (option 001) Not Assigned 1
BNC(f)-(f) Adapters 1250-0080 4
Case 16380-85104 1
Calibration Report Not Assigned 1
Operating Note (This Manual) 16380-90221 1