Keysight Technologies 11644A K, User'S And Service Manual

Page: 32 / 72

4-6 X, P, and K 11644A
Use, Maintenance, and Care of the Devices
Connections
Aligning Two Precision Flanges
1. Place the slip pins in the top and bottom holes of one flange, as shown in Figure 4-3 .
Figure 4-3 Inserting Slip Pins
2. Using the pins as guides, carefully align the flanges and insert two screws in the diagonal corner holes,
as shown in Figure 4-4 .
Figure 4-4 Aligning Flanges
3. Place a lock washer and nut on each screw, and finger tighten.
4. Insert the remaining two screws.
5. Place a lock washer and nut on each screw, and finger tighten.
6. Remove the slip pins.
7. Go to
“Tightening a Flange Connection” on page 4-8 .