Operation Method of Bluetooth
I. Connection Method for a Cell Phone
1. Load the battery and turn on the power switch, then the speaker will emit the
prompt tone of “Dingduding” with the red LED on, blue LED quickly flashing
and the speaker in the standby stage.
2. Open the setting for the phone Bluetooth and search, then the phone will
display “Music Umbrella”; enter the password “0000” according to the phone
prompt and press OK, and wait. The phone prompts successful connection;
if the blue LED of the speaker slowly flashes, it indicates that the phone is
successfully connected with the speaker (due to different brands of phone,
the matching time will vary). Enter an authentication password for use of the
first time and a password isn’t required for use of the second time; quickly
enter the connection status in the “Music Umbrella” for the phone.
3. After successful connection, return to the interface of music play by the phone
and select songs, play music.
II. Connection Method of a Panel Computer
Refer to the connection method for a cell phone.
III. Connection Method for a Notebook Computer
Since a notebook computer has a wide range of Bluetooth, the connection
method varies from each other; if it fails to connect and play it for the first
time, a new version of Bluetooth drive can be installed in the notebook
computer;
Solutions to Common Problems
Phenomenon
Problems
Solutions
Unsuccessful
connection for
many times
Too small sound
or distortion
Discontinuous sound
for music playing
The indicator fails
to be on
1: check that the speaker remains standby.
2: The Bluetooth receiving devices around are too many that it is
difficult to search; close other Bluetooth devices.
Check the volume setting value of the cell phone and adjust the
volume appropriately.
Beyond the effective connection distance for the speaker or there
is some obstacles between the speaker and cell phone.
Check the electric quantity of the battery.
- 3 -
