background image

Warranty Information

KEYS FITNESS PRODUCTS, L.P.

POWER SYSTEM SERIES 

LIFETIME WARRANTY

This Warranty applies in the United States and Canada to products manufactured or distributed by
Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the original
purchaser is lifetime of the original purchaser.

Keys warrants that the Product you have purchased for non-commercial, personal, family, or house-

hold use from Keys or from an authorized Keys reseller is free from defects in materials or workmanship under normal use dur-
ing the warranty period. Your sales receipt, showing the date of purchase of the Product, is your proof of purchase. This war-
ranty only extends to you, the original purchaser. It is not transferable to anyone who subsequently purchases the Product from
you. It excludes expendable parts (wear items). Wear items pertain to components that might need to be replaced due to nor-
mal wear and tear. These items vary per product but will include grips, chains, cables, pads, upholstery, pulleys, bearings, etc.
Please contact a Keys customer service representative for specifics on wear items. This Warranty becomes VALID ONLY if the
product is purchased through a Keys Fitness authorized dealer unless otherwise authorized by Keys Fitness in writing and
must be assembled / installed according to the instructions included with the Product.

In a light institutional setting, Keys will extend a one year warranty to the the original purchaser.

During the warranty period Keys will repair or replace (at Keys' option) the product if it becomes defective, malfunctions, or oth-
erwise fails to conform with this Warranty under normal use. In repairing the Product, Keys may replace defective parts, or at
the option of Keys, serviceable used parts that are equivalent to new parts in performance.  All exchanged parts and Products
replaced under this warranty will become the property of Keys. Keys reserves the right to change manufacturers of any part to
cover any existing warranty.

This warranty DOES NOT COVER shipping charges, export taxes, custom duties and taxes, or any other charges associated
with transportation of the parts or Product.  To obtain warranty service, you must contact a Keys authorized retailer, service
technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned
to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other
charges associated with transportation of the parts or Product. In addition, you are responsible for insuring any parts or
Product shipped or returned. You assume the risk of loss during shipment. You must present Keys with proof-of-purchase doc-
uments (including the date of purchase). Any evidence of alteration, erasing or forgery of proof-of-purchase documents will be
cause to void this Warranty.

This Warranty does not extend to any product not purchased from Keys or from an authorized Keys reseller. This Limited
Warranty does not extend to any Product that has been damaged or rendered defective; (a) as a result of accident, misuse, or
abuse; (b) by the use of parts not manufactured or sold by Keys; (c) by modification of the Product or normal wear and tear;
(d) operation on incorrect power supplies; or (e) as a result of service by anyone other than Keys, or an authorized Keys war-
ranty service provider. Product on which the serial number has been defaced or removed is not eligible for warranty service.
Should any Product submitted for warranty service be found ineligible, an estimate of repair cost will be furnished and the
repair will be made if requested by you upon Keys' receipt of payment or acceptable arrangements for payment.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, KEYS MAKES NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. KEYS EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. NEITHER
KEYS NOR ANY OF ITS AFFILIATES SHALL BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT
APPLY TO YOU. This Limited Warranty gives you specific legal rights and you may also have other rights that may vary from
state to state. This is the only express warranty applicable to Keys-branded products.   Keys neither assumes nor authorizes
anyone to assume for it any other express warranty.

PLEASE SEND IN THE INCLUDED WARRANTY CARD OR REGISTER ON-LINE AT

www.keysfitness.com

WITHIN

TEN (10) DAYS OF PURCHASE TO REGISTER YOUR UNIT WITH KEYS FITNESS PRODUCTS, LP.
MAIL WARRANTY CARD TO:  KEYS FITNESS PRODUCTS, PO BOX 551239, DALLAS, TX  75355

33

Summary of Contents for Power System 1850



































Reviews: