Program and Operating Instructions
QUICK START / MANUAL MODE-EC6500HR
♦
Plug into a surge protector outlet. Attach the
Red
Safety Key
on to the treadmill console.
♦
Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
♦
Press POWER button. There will be an eight (8) second delay after pressing the POWER button
before data can be entered. The TIME window will flash.
♦
Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the
belt starts moving. Speed or incline may be adjusted by using the appro (increase) or –
(decrease) button.
♦
To end your workout
, press START/STOP button. Belt will gradually slow to zero.
♦
To pause your workout
, press PAUSE.
♦
To re-start after pausing
: Press the PAUSE button.
WARNING
:
THE TREADMILL BELT
WILL RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
♦
Countdown Time, Preset Speed and/or Incline
: Time, Speed, and Incline may be preset prior to
getting started. After pressing the POWER button, the time window will blink. Use the SPEED/
TIME + or – arrows to select your workout time, then press the ENTER PROGRAM button. The
SPEED/TIME window will now be flashing. Using the same + or – arrows, select the speed for your
workout, then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the
I or – arrows to set your workout incline, then press ENTER PROGRAM. To start, press
the START/STOP button.
PAGE 12
ENTER PROGRAM
POWER
START/STOP
PAUSE
INCLINE
SPEED/TIME
