background image

Important Safety Information

WARNING!

Before using this treadmill or starting any exercise program, consult your physician.

This is especially important for persons over the age of 35 and/or persons with pre-existing health
problems. The manufacturer or distributor assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.

WARNING! 

To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user, it

is important to review this manual and the following precautions 

before

operation.

SAFETY PRECAUTIONS AND TIPS 



It is the owner’s responsibility to ensure that all users of this treadmill have read the Owner’s Manual
and are familiar with warnings and safety precautions.



This treadmill has a user maximum capacity of 250 pounds.



The treadmill should only be used on a level surface and is intended for indoor use only. The tread-
mill should not be placed in a garage, patio, or near water and should never be used while you are
wet. KEYS recommends a treadmill mat be placed under the treadmill to protect floor or carpet and
for easier cleaning.



Follow safety information in regards to plugging in your treadmill. Keep the power cord away from
the incline wheels and do not run the power cord underneath your treadmill. Do not operate the
treadmill with a damaged or frayed power cord.



Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the
treadmill with bare feet, sandals, socks or stockings.



Always straddle the belt and allow it to start moving before stepping onto the belt.



Hold on to handrails when adjusting speed, incline, or other controls.



Always examine your treadmill before using to ensure all parts are in working order.



Allow the belt to fully stop before dismounting.



Pets should never be allowed near or on the treadmill.



Do not leave children unsupervised near or on the treadmill.



Never operate the treadmill where oxygen is being administered, or where aerosol products are being
used.



Never insert any object or body parts into any opening.



For safety and to prevent damage to your treadmill, no more than one person should use the tread-
mill at a time.



Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only
be performed by an authorized service representative, unless authorized and/or instructed by the
manufacturer



Failure to follow these instructions will void the treadmill warranty.



Never leave the treadmill unattended while it is running

4

Summary of Contents for ALL800





















Reviews: