KEYKING
GROUP
FPC1000 Biometric Controller User Manual
(
V1.00
)
Page 40 of 43
3.5 Door Open Mode
1
FP Mode
Application: Put your finger on the biometric reader of FPC1000/2000, if verify passed, the screen
will show that verify OK and display User ID, User Name and Card Number. Then the replay will
response-door open. If verify failed, then FPC1000/2000 will beep three sounds and display Please
try again, door remains closed.
Note: Only the registered personnel can pass verifying.
2
FP/Card
Application: Flash a registered card or FP
FPC1000can control a door by FP/Card
3
FP+Card
Application: Flash a registered card and FP.
Flash a registered card in front of FPC1000/2000. (read range 3-10cm), FPC1000/2000 will beep a
long sound and then put your finger on the reader, if verify passed then door will open. The interval
time between flashing card and verify FP is 8 seconds.
4
FP or Card
Application: Input your User ID by using the keypad and then verify your FP or flash your card to
complete access process.