Keyestudio ARDUINO maker learning kit, Manual

Page: 136 / 162

keyestudio
www.keyestudio.cc
134
Connect the motor to digital pin 9.
Compile a program to control the motor to rotate to the commanded angle input by the user and
display the angle on the screen.
Sample program A
//////////////////////////////////////////////////////////
int servopin=9;// select digital pin 9 for servomotor signal line
int myangle;// initialize angle variable
int pulsewidth;// initialize width variable
int val;
void servopulse(int servopin,int myangle)// define a servo pulse function
{
pulsewidth=(myangle*11)+500;// convert angle to 500-2480 pulse width
digitalWrite(servopin,HIGH);// set the level of servo pin as “high”
delayMicroseconds(pulsewidth);// delay microsecond of pulse width
digitalWrite(servopin,LOW);// set the level of servo pin as “low”
delay(20-pulsewidth/1000);
}
void setup()
{