Keydemon VideoGhost DVI, User Manual

Page: 11 / 16

VideoGhost
Copyright © 2018 Keydemon 11
Advanced parameter list (use only when you know what you’re doing!)
Parameter Values Example Description
Brightness
Brightness factor
(default 0)
Brightness=50
The factor to add to the standard
image brightness from 0 to 150
ForceWidth
Image width in pixels
(defaults to resolution X)
ForceWidth=1024
If this parameter is present, it will
force the width of the captured image
regardless of the current resolution.
ForceHeight
Image height in pixels
(defaults to resolution Y)
ForceWidth=768
If this parameter is present, it will
force the height of the captured image
regardless of the current resolution.
TopMargin
Top margin in pixels
(default 0 or table value)
TopMargin=10
If this parameter is present, it will cut
out the top part of the captured
image. It is used primarily in the VGA
version, for filtering out the useful part
of the signal.
LeftMargin
Left margin in pixels
(default 0 or table value)
LeftMargin=5
If this parameter is present, it will cut
out the left part of the captured image.
It is used primarily in the VGA
version, for filtering out the useful part
of the signal.
RightFrame
Right frame in pixels
(default 0 or table value)
RightFrame=20
If this parameter is present, it will add
a frame on the right side of the
captured image. It is used primarily in
the VGA version, for filtering out the
useful part of the signal.
BottomFrame
Bottom frame in pixels
(default 0 or table value)
BottomFrame=15
If this parameter is present, it will add
a frame at the bottom of the captured
image. It is used primarily in the VGA
version, for filtering out the useful part
of the signal.
ShiftX
Horizontal shift value
(default 0 or table value)
ShiftX=-10
If this parameter is present, it will shift
the image horizontally within the
bounds given by LeftMargin and
RightFrame. It is used primarily in the
VGA version, for filtering out the
useful part of the signal.
ShiftY
Vertical shift value
(default 0 or table value)
ShiftY=-5
If this parameter is present, it will shift
the image vertically within the bounds
given
by TopMargin and
BottomFrame. It is used primarily in
the VGA version, for filtering out the
useful part of the signal.