HX3 Drawbar Expander 19
Percussion Setup
The main menu item Percussion is not active, when EnvelopeGen mode is selected. Then only
(EG ADSR) appears as an indication that a similar effect can be achieved by designing the ADSR
envelope.
Percussion
– may be selected in all available combinations of NORM/SOFT, FAST/SLOW,
2nd/3rd (not for H100) and OFF.
Vibrato Setup
(see overview)
Phasing Mode
Phasing rotor settings are available only if the
Extended License
is installed.
Phasing Fast
– switch to fast rotary effect (same as in submenu).
Phasing Upper
– activates phasing rotor (PHR) for upper manual (insert effect).
Phasing Lower
– activates phasing rotor (PHR) for lower manual (insert effect).
From all three main menu items, you will be taken to the Phasing Mode submenu:
PHR We/Boe
– Switching between different phasing rotor models: On = We, OFF = Boe.
PHR Ensemble
– Strings effect with multiple modulation.
PHR Celeste
– deep modulation with feedback.
PHR Fading
– slow phasing effect.
PHR Weak
– weak modulation, combinable.
PHR Deep
– deeper modulation, combinable.
PHR RotFast
– fast rotary effect.
PHR Ramp up
– ramp-up effect for rotor slow/fast, combinable.
Without options, a slow rotary effect is active.
Weak, Deep, RotFast
and
RampUp
can be
combined with it. Two additional vibrato effects can be achieved by simultaneously selecting the
Ensemble
and
Celeste
options as well as
Celeste
and
Fading
. These effects can be used, for
example, as an additional vibrato channel for the H100 emulation.
Sync PHR/Rotr
– The fast / slow switching of the phasing takes place together with the
rotor switching. So one footswitch can serve for both functions.
Reverb Levels
(see overview)
Generator Setup
Organ Preconf
Organ Model Selection affects Gating Mode and Gen&Vib Mode (see below). With standard
license only B3 Mode is available.
TG Tuning
– allows organ generator tuning in range from A = 433 through 447 Hz.
