6
External Audio Outputs
Analog audio output via 3.5mm stereo phone jack
›
2 channel analog audio output from the selected HDMI
input source
›
Converts only 2 ch. PCM audio from the HDMI input to
2 channel analog audio output
›
Only supports 2 ch. PCM audio, not multi-channel PCM,
Dolby, DTS, HD audio
Digital audio output via Coax/RCA
›
Digital audio output from the selected HDMI input source
›
Uses SPDIF format
›
Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio
Digital audio output via Optical
›
Digital optical audio output from the HDMI input
›
Uses SPDIF format
›
Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio
RS-232 Commands and Protocol
›
KD-HDSW Pro units are compatible with all Control Systems, such as Compass Control
®
, AMX
®
,
Control4
®
, Crestron
®
, RTI
®
, Universal
®
›
Connect your Control System’s Master Controller to the KD-HDSW Pro unit using the RS-232
port. Follow all instructions provided with your control system.
›
RS-232 Protocol:
»
Baud Rate = 57600 bits per second
»
Data Bits = 8 / Stop Bits = 1
»
Parity = None
»
Flow Control = None
RS-232 Command
Description
Azz
All Commands may have Prefix System Address zz=[01-99]
H
Help
PF
Power Off
PN
Power ON
STA
Show Global System Status
Video Output Setup Commands: yy = [01-04] (A=All)
SPO SIyy
Set Output to Video Input yy
SPO ON/OFF
Set Output ON/OFF
Audio Output Setup Commands: [E=Enable, D=Disable]
SPO AA E/D
Enable/Disable External Analog Audio Output
SPO DA E/D
Enable/Disable External Digital Audio Output
›
All RS-232 commands must be in
lower case letters
›
Command must be terminated with
a carriage return
Summary of Contents for Phantom KD-HDSW2x1Pro
Page 1: ......
