Key Digital KD-X222 Operating Instructions Manual Download Page 12

20

21

How to Contact Key Digital

®

Customer Support 

For customer support questions please contact us at: 

Phone: 914-667-9700

 

E-mail: 

[email protected] 

Technical Support 

For technical questions about using Key Digital

®

 products, please contact us at: 

Phone: 914-667-9700

E-mail:  

[email protected]

Repairs and Warranty Service 

Should your product require warranty service or repair, please obtain a  
Key Digital

®

 Return Material Authorization (RMA) number by contacting us at: 

Phone: 914-667-9700

E-mail: 

[email protected]

Feedback 

Please email any comments/questions about the manual to:

E-mail:

[email protected]

Warranty Information

All Key Digital

®

 products are built to high manufacturing standards and should 

provide years of trouble-free operation.  They are backed by a Key Digital Limited 

3

 Year Product Warranty Policy. 

http://www.keydigital.com/warranty.htm

 Important Product Warnings:

1.

 Connect all cables before providing power to the unit.

2.

 Test for proper operation before securing unit behind walls or in hard to access 

spaces.

3.

 If installing the unit into wall or mounting bracket into sheet-rock, provide proper 

screw support with bolts or sheet-rock anchors.

 Safety Instructions:

Please be sure to follow these instructions for safe operation of your unit.

1.

 Read and follow all instructions.

2.

 Heed all warnings.

3.

 Do not use this device near water.

4.

 Clean only with dry cloth.

5.

 Install in accordance with the manufacturer’s instructions.

6.

 Do not install near any heat sources such as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that produce heat.

7.

 Only use attachments/accessories specified by the manufacturer.

8.

 Refer all servicing to qualified service personnel. Servicing is required when the 

device has been damaged in any way including:

 

»

Damage to the power supply or power plug

 

»

Exposure to rain or moisture

 Power Supply Use:

You MUST use the Power Supply 

provided

 with your unit or you 

VOID

 

the Key Digital

®

 Warranty and risk damage to your unit and associated 

equipment.

Summary of Contents for KD-X222













Reviews: