10
›
Firmware Upgrade Switch:
Used during firmware upgrades
»
Switch should remain in Operate position during usage . RS-232 signal pass-through will be lost
when set to FW Load position .
»
Firmware should only be upgraded when instructed by Key Digital Technical Support
»
Firmware loaded via RS-232
›
LED Lights
: Indicate system connectivity status
»
HDMI Output Active (
blue
) illuminates solid from active Hot Plug Detection voltage
from connected display
»
Link (
blue
) illuminates solid from healthy HDBaseT connectivity with Tx unit from .
Steady blink with no active video transm reception
»
Live (
yellow
) steady blinking indicates active CPU
»
Video (
green
) illuminates solid with active HDMI signal
»
Power (
red
) illuminates solid with proper powering from local connection / presentation switch
